Which equipment is commonly used for organic fertilizer fermentation

Which equipment is commonly used for organic fertilizer fermentation?
1. a forklift
It is used for the transfer and stacking of organic materials during the fermentation, the deep processing stage, and sometimes the forklift is needed to transport the fermentation semi-finished products or other added raw materials to the processing workshop.
2. Stacker
It is suitable for the fermentation and turning of organic waste such as poultry manure, sludge garbage, sugar factory filter mud, slag cake and straw sawdust, and fermentation equipment necessary for the production of organic fertilizer. This equipment is mainly used to supply oxygen to organic materials and fermentation strains under aerobic fermentation conditions to promote their rapid and full decomposing and drying and dewatering to prepare for subsequent processing.
3. Ground type stacker (diesel powered) is divided into trough type stacker and ground type stacker. Ground-type stackers are divided into two types: tire type and crawler type. There is no track, which can be turned over directly on the ground. The operation is simple, with a crushing function, it can turn around in place. high working efficiency. It is suitable for large and medium-sized organic fertilizer production enterprises with larger sites.
4. Trough type stacker (rail, electric power)
It is suitable for fermentation materials with relatively dry raw materials or lighter specific gravity. Compared with the ground-type stacker, the trough-type fermentation stacker has a small footprint and a high degree of standardization. According to the span of the fermentation tank, it can be divided into models ranging from 2 to 20 meters. There are various types of trough turning machines, including reciprocating, chain-plate, spiral, etc., organic fertilizer manufacturers can choose according to their annual production capacity Suitable turning equipment. Choose a trough dumper with a span of less than 4 meters, it is recommended to have a hydraulic lifting system, otherwise if the raw materials
When the water content is high, it will bring a lot of inconvenience to the turning operation and fermentation! For fermentation tanks without ventilation ducts at the bottom, a small hole can be left every 1.5 meters below the bottom. The aperture is 12x 12cm. It is convenient to enter oxygen and drain when dumping.