What equipment does the small-scale organic fertilizer equipment production line include?

The small-scale organic fertilizer equipment production line is a complete set of organic fertilizer production equipment with a small output. The output is generally between 2,000 tons and 10,000 tons, and the equipment included is also semi-automatic. The following are the equipment included in the production of small organic fertilizer equipment:

1.Pre-fermentation equipment

It is mainly used for composting and turning over, which is more suitable for the process requirements of microbial fermentation and storage of manure into fertilizer. It can effectively mix viscous stored manure with microbial preparations and straw powder. Not only the fermentation speed is much faster, it also effectively prevents the production of harmful and odorous gases such as hydrogen sulfide, ammonia, indole, etc. during the fermentation process, which not only meets environmental protection requirements, but also produces good organic fertilizers.

2.Special crusher for organic fertilizer

The main function is to better crush the fermented materials, which can lay a solid foundation for the next program provider. When choosing an organic fertilizer crusher, you must choose the one that is suitable for your own use. Don’t choose blindly, otherwise the crushing effect will not be achieved. On the contrary, it will affect the normal operation of the next process.

3.Organic fertilizer mixer

The main function is the mixing of formula fertilizers and the addition of various substances, such as nitrogen, phosphorus, potassium, humic acid, etc. Mix well and proceed to the next procedure.


It is mainly for granulation. The agitated material is evenly fed into the granulator by a conveyor for deep granulation. The granulator can be made into new granules of various sizes and shapes according to the local market. There are many kinds of granulator styles and models, and the suitable granulator can be selected according to the customer’s output and requirements.


It mainly plays the role of evaporating the moisture of the material. Because the granulator has a large amount of moisture during the granulation process, it cannot meet the national requirements. After the granules are made, they cannot be packaged immediately. Drying equipment is required to evaporate the water to meet the national standards. The next process is carried out in the state.


Due to the high temperature of the dried materials, they cannot be packaged immediately and the woven bag will be burned easily. The temperature of the materials needs to be quickly reduced to a constant temperature through a cooler for the next process.

7.Screening machine

It mainly plays a role of classification. Due to the pelletizing rate of the pelletizer, the difference in size after the dryer and the cooling opportunity, and the particle damage, it is necessary to distinguish the finished particles from the defective products, and the finished particles go through the next process. , And the inferior products are re-pulverized for granulation cycle work.

8.Coating machine

The main function is to coat the particles with a coat. Due to the different raw materials, the colors of the particles are also different, and the particles can be wrapped in various colors.

9.Automatic packaging machine

It mainly plays the role of finished pellets, automatic bagging, weighing, and sewing, saving labor.

The above automatic packaging machine is the production process of the small organic fertilizer equipment production line, and the key role played by the main equipment. Generally, the annual output of 5,000 tons of granular fertilizer production line is about 200,000. It can be adjusted according to the customer’s output and the equipment configuration price.