Things to note when using organic fertilizer equipment for the first time

Things to note when using organic fertilizer equipment for the first time are divided into the following four points:
1. Each component of the new equipment has not been run-in yet, and may be stuck. When using it for the first time, the operator needs to warm up the equipment. First, raise the temperature to the point where the motor V-belt is pulled by hand until it is free, and then connect and pull the motor according to the normal working options. 8-10 times, gradually raising the temperature, which takes about 40-50 minutes.
2. In addition to the preliminary temperature adjustment, the organic fertilizer equipment needs to continue to be heated and supplemented with heat after it is turned on. At the same time, it must be adjusted to different temperatures according to different properties of materials.
3. During normal operation, the machine temperature should remain stable and should not fluctuate high or low. The temperature near the vent hole and up to the machine head should be maintained at about 200 degrees. At this temperature, most materials can generally be processed well.
4. When shutting down, the operator should completely cut off the power supply, remove the wrench part of the equipment head, and wait for it to be preheated separately before the next use.
It is important to understand the details that need to be paid attention to when using organic fertilizer equipment for the first time. It is important to maintain and use it reasonably in order to ensure that the life of the equipment is longer.