Symptoms and solutions for problems in the organic fertilizer production line

Generally, the organic fertilizer production line will vibrate, and the reason for the vibration is mostly due to the unstable operation of the equipment. After the machine is turned on, the main shaft becomes loose, which causes the hammer to swing without a fixed balance point, which causes the overall equipment to shake; In addition, if the weight of each group of hammers is different, there will be vibration; if there is a noise during production, it may be that the hammers hit the liner directly. If these conditions are not dealt with after they are discovered, they will cause heating of the bearing, and at the same time will bring a certain extra load to the motor.

The organic fertilizer production line with an annual output of 10,000 tons is composed of fermentation system, drying system, deodorization and dust removal system, organic fertilizer special crusher, batching system, mixing system, organic fertilizer special granulator and finished product packaging machine. Although the process structure is similar, the organic fertilizer equipment is not fixed. It is mainly based on its own material characteristics, site conditions, specific production requirements, degree of automation, and investment budget to choose the purchase plan that meets its own conditions.

Ingredients crushing and mixing system: The function of this system is to crush, mix and mix the composted materials, NPK inorganic fertilizers and other additives in a certain proportion. It is recommended to use a vertical crusher to crush pig manure compost, which is not easy to stick to the wall, not easy to block, multi-layer turbulence, and chain hammer structure to improve crushing performance; continuous automatic batching system is adopted, which is suitable for dynamic metering and batching control of organic fertilizer raw materials: mixing operation Equipped with a double-shaft continuous mixer, which has good sealing performance, and the sticky and wet materials are not easy to adhere to the root of the lifting shaft.