Structural characteristics and advantages of orbital organic fertilizer fermentation and turning machine

Orbital fermentation turner and turner are used for the fermentation and turning of organic wastes such as livestock and poultry manure, sludge waste, sugar mill filter mud, slag cake and straw sawdust. They are widely used in organic fertilizer plants, complexes Fermentation and decomposing and water removal operations in fertilizer plants, sludge waste plants, horticultural farms, and Agaricus bisporus plantations. The organic fertilizer tank type fermentation turner and turner are suitable for aerobic fermentation, and can be used in conjunction with solar fermentation chambers, fermentation tanks and moving machines.

Orbital organic fertilizer fermentation turner, turner equipment structure is reasonable

The trough turning and throwing machine is composed of main components such as transmission device, lifting device, traveling device, turning device, transfer vehicle and so on. The motor directly transmits the power to the cycloidal pinwheel reducer through the sprocket to the turning drum, and the stirring blades on the drum are spirally distributed. The material in the fermentation tank can be turned and stirred to a position of 0.7-1m away, which has the effect of fast turning speed and uniform stirring, so as to achieve full contact between the material and the air, and make the fermentation effect of the material better.

1.Orbital turner, power transmission device of stacker. The modified device is composed of a motor, a reducer, a sprocket, a bearing seat, a main shaft, etc. It is an important device that provides power for the turning drum.

2.Orbital turning machine, turning device walking device. The modified device is composed of a traveling motor, a transmission gear, a transmission shaft, and a traveling sprocket.

3.Lifting device or hydraulic lifting device. The lifting device is composed of a winch, a coupling, a transmission shaft, a bearing seat, etc. The hydraulic lifting device is composed of a hydraulic pump station, a solenoid valve body, a hydraulic oil pipe, and a hydraulic cylinder block.

4.Turning and turning machine device. The device is composed of sprockets, support arms, turning drums and so on.

5.Transfer the car. The device is composed of a traveling motor, a transmission gear, a transmission shaft, a traveling wheel, etc. It provides a temporary carrier for the stacker to change slots.