Processing steps of organic fertilizer processing equipment

Before handling organic fertilizer processing equipment, the ingredients should be prepared first, and then the materials should be fully stirred. After the mixing is completed, the granulation is started, dried and cooled, and then the finished product is sieved and packaged. Organic fertilizer production equipment must be preheated prior to start-up. Then adjust the appropriate temperature. After the equipment enters the normal operating state, the temperature should be at an appropriate position, and the power should be turned off in time after use. The following is a detailed introduction.
Processing steps of organic fertilizer processing equipment:
1. The first component of raw materials: urea, ammonium nitrate, ammonium chloride, ammonium sulfate, ammonium phosphate (monoammonium phosphate, diammonium phosphate, heavy calcium, ordinary calcium) potassium chloride (potassium sulfate) and other raw materials in a certain proportion ( According to market demand and local soil test results).
2. Raw materials for mixed fertilizer equipment: Evenly mix the prepared raw materials to increase the uniform fertilizer efficiency content of the overall fertilizer particles.
3. Raw material granulation of organic fertilizer equipment: Send the uniformly mixed raw materials to the granulator of organic fertilizer equipment for granulation (new organic fertilizer granulation can be used, or extrusion granulation can be used).
4. Then dry the granules: send the granules produced by the granulator to the dryer of the organic fertilizer equipment, and dry the moisture contained in the granules to increase the strength of the granules and facilitate storage.
5. Cooling of dried granules: the temperature of dried fertilizer granules is too high, and it is easy to agglomerate. After cooling, it is convenient for bagging, storage and transportation.
6. Separation of particles by organic fertilizer screening machine: after cooling the particles, crush and re-granulate the unqualified particles, and then screen out the qualified products.
7. Make high-quality fertilizer, and then coat the finished product: coat qualified products to increase the brightness and roundness of the particles.
8. After passing through the automatic packaging machine of organic fertilizer equipment: pack the coated granules, that is, the finished product, and store them in a ventilated place.