Maintenance methods of organic fertilizer granulator

Maintenance methods of organic fertilizer granulator:

1.Keep the work site clean. After each test of the organic fertilizer equipment, the residual glue inside and outside the granulation leaves and the granulation pot should be thoroughly removed. The glue and flying objects scattered or splashed on the organic fertilizer equipment should be cleaned up, and the organic fertilizer equipment should be removed. Wipe the exposed processing surface of the machine clean, apply anti-rust meat paint, and put on a corresponding protective cover to prevent secondary intrusion of dust.

2.The organic fertilizer equipment has no external oiling hole, and the gears and worm gears are lubricated with special butter for organic fertilizer equipment. The upper gear and lower gear should be added with Sanhe butter once a season. When refueling, the power unit gear box cover and transmission gear cover can be opened respectively). The sliding surface between the support gearbox and the hinge of the bracket should be lubricated by oil dripping regularly. The worm gear box and bearings have been filled with enough transmission butter before leaving the factory. However, the transmission machine should be thoroughly cleaned and all protective lubricants should be replaced after every one year of use.

3.Always pay attention to the operation of the organic fertilizer equipment. There should be no serious abnormal noise, and there should be no sound of metal friction. If any abnormality is found, stop using it immediately and conduct inspection. It can be used only after troubleshooting. If there is no corresponding response after inspection, For some reason, the machine cannot be started. If there is metal friction sound, you can first check the gap between the organic fertilizer equipment.

4.Always check the standard gaps between organic fertilizer equipment.

5.When overhauling organic fertilizer equipment, the working gap should be re-measured each time and adjusted multiple times until it meets the standards before continued use.

6.If the organic fertilizer equipment cannot operate when the program controller is pressed, check whether the power supply voltage, power plug socket, connection plug socket, etc. are normal, and check for internal faults in the controller.

This is the introduction of “How to maintain and maintain organic fertilizer granulator” knowledge. For more knowledge about organic fertilizer equipment, you can browse other articles on this site or call us for consultation.