Eight precautions for daily troubleshooting of organic fertilizer equipment

Eight precautions for daily troubleshooting of organic fertilizer equipment:

The organic fertilizer equipment is simple and practical, and the fertilizer produced can be quickly absorbed by the crops. In order to better use the organic fertilizer production equipment, it is very important to do the maintenance of the organic fertilizer equipment. Below we will focus on the maintenance of the organic fertilizer production equipment.

  1. The shaft in the organic fertilizer production equipment bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life.
  2. Lubricating oil directly affects the service life and operating rate of organic fertilizer equipment, so the injected lubricating oil must be clean and the seal must be good.
  3. The newly installed wheel tyres are prone to looseness and must be checked frequently.
  4. For organic fertilizer equipment, attention should be paid to whether all parts of the machine are working properly.
  5. Pay attention to check the degree of wear of the easily worn parts of the organic fertilizer equipment. Pay attention to replace the worn parts at any time.
  6. The bottom frame of the movable device of the organic fertilizer equipment should be cleaned of dust and other debris to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, which may cause serious accidents.
  7. If the rotating gear in the organic fertilizer equipment is running, if there is an impact sound, it should be stopped immediately for inspection and eliminated.
  8. The problem of unsatisfactory drying effect in organic fertilizer equipment. When the organic fertilizer dryer can meet the output, the drying effect is not good. Most of the internal structure is unreasonable or the length of the cylinder is not enough. Although these are not major problems, they affect the interests of users to a very high degree. The solution is to reasonably adjust the internal lifting plate and length according to the material requirements. The lifting plate plays a role of spreading the material to increase the contact area with the hot air, and the increase of the cylinder length extends the drying time.