Characteristics of chain crusher
The chain crusher is suitable for crushing bulk materials with more fibers and producing organic fertilizers. The machine uses a four-corner planetary chain with high rotation and good flexibility to crush the materials during crushing. The inlet and outlet are reasonably designed. The crushed materials are uniform, not easy to stick to the wall, and easy to clean.
Features Overview:
The inner wall of the machine casing is lined with stainless steel, which alleviates the problem of sticking to the wall and difficult to clean. The crusher hammer is forged with special steel, which is wear-resistant and corrosion-resistant and can effectively extend the service life and improve production efficiency. This machine has the characteristics of reasonable structure, simple operation, strong applicability, and convenient maintenance.
Features:
(1) Simple and reasonable structure, low operating cost, using the principle of stone hitting stone, small wear;
(2) High crushing rate, energy saving;
(3) With fine crushing and coarse grinding functions;
(4) Little affected by the moisture content of the material, materials with a moisture content below 50% can be crushed;
(5) The working noise is less than 75 decibels (db level), and there is little dust pollution;
(6) Suitable for crushing medium-hard and extra-hard materials;
(7) The impeller self-lining has little wear and is easy to maintain;
(8) It has strong adaptability to materials with high moisture content, is not easy to block. And has smooth material discharge. The material enters from the feed port and collides with the high-speed rotating chain in the casing. After the collision, the material is squeezed and crushed and then hits the inner wall of the casing and collides with the chain again. In this way, after several collisions during the falling process, it becomes powdery, and particles below 3mm are discharged from the bottom;
(9) The inner wall of the crusher casing is lined with polypropylene board, and the crushed material does not stick to the wall and is easy to clean. (10) The blades of the crusher are made of special steel, which can effectively improve production efficiency;
(11) The machine has a reasonable structure, easy operation, and strong applicability.