Characteristics and maintenance requirements of trough-type turning machine

trough-type turning machine

The trough-type turning machine has a simple structure, is easy to operate, and has a short fermentation cycle. It can quickly disinfect and sterilize fermented products. To prevent the wear of equipment parts and failure to operate normally, the equipment must be maintained regularly after use. First, the interior should be cleaned after use. If abnormal noise occurs during operation, the machine must be stopped immediately to check the cause. Let’s use the editor to learn more.

Features of trough-type turning machine:

  1. Organic fertilizer trough turning machine, simple structure, and easy operation. Equipped with the application part of the semi-wet material crusher, beneficial microorganisms can promote the rapid decomposition of organic waste such as livestock and poultry manure. Combined tank-type continuous aerobic fermentation technology can be used to deodorize organic waste in a short time quickly. Sterilization and decomposition achieve the purpose of harmlessness, rich resources, reduced disposal, and saving fermentation sites. The fermentation cycle is 2. The organic fertilizer trough-turning machine automatically controls the number of times the fermented material is turned over during the fermentation process. Under the action of the trekking lateral walking power, the compost turning machine auger will continuously throw up, scatter, and land the fermented materials and make a certain displacement to the rear of the fermentation tank. So that the materials are regularly and equidistantly moved back into the tank, thus forming a continuous oxygenated fermentation process.
  2. The organic fertilizer trough-turning machine has a multi-tank description under the action of the shift car. Which reduces the investment in organic fertilizer equipment and granulator equipment. Completes the innovation of large-scale production, and is quite useful in the production of organic fertilizer.

Maintenance precautions for trough turning machine:

  1. Regularly lubricate the parts of the organic fertilizer turning and polishing machine to avoid long-term use losses.
  2. After the organic fertilizer turning machine works, you can use a broom to clean the reel of the organic fertilizer turning machine. Remove the garbage left on it to make it clean and hygienic. It can also ensure that the organic fertilizer is handed in. The polishing machine is not easy to rust. We can use a broom to clean the door to ensure hygiene.
  3. If there is a lot of noise during the working process of the turning and throwing machine, we should stop using it and check the cause. If it cannot be checked, the organic fertilizer flip spreader should be handled in time, parked in the designated location, and then asked for repair by professionals.
  4. After the equipment has been running for 200 hours, the oil of all reducers should be replaced. Replace it every six months in the third quarter, and once a year thereafter.
  5. Lubricating oil directly affects the service life and operation rate of organic fertilizer production equipment. Therefore, the injected lubricating oil must be clean and well-sealed. The main oiling parts of the machine are the sliding surfaces of the rotating bearings, rolling bearings, and all gear movable bearings.
  6. The frame plane of the movable device of the flipping machine should be free of dust and other debris to prevent the movable bearing from moving on the frame when the machine encounters materials that cannot be broken, resulting in serious accidents.
  7. Pay attention to regular inspections and replenish when the oil level is insufficient.