Application process of organic fertilizer horizontal fermentation equipment

Application process of organic fertilizer horizontal fermentation equipment:

Raw material collection: First, organic waste needs to be collected as raw material, which can include crop residues, kitchen waste, livestock and poultry farming waste, etc. These raw materials should be decomposable organic substances.

Raw material pretreatment: The collected raw material may contain non-decomposable impurities, such as plastic, glass, etc. Before putting into the fermentation equipment, the raw materials need to be pre-treated to remove or separate these impurities.

1.The organic fertilizer fermentation tank equipment is started by the control system to control the motor, which drives the stirring shaft to roll, and adds an appropriate amount of materials to be fermented into the tank through the feed port, and the spiral blades on the stirring shaft drive the materials to turn over, so that the materials are fully in contact with the air. , while stirring, inject high-pressure gas into the tank through the gas inlet, and start to enter the fermentation stage.

2.The organic fertilizer production fermentation tank control system intelligently controls the heating equipment, heats the heat transfer oil in a small range, the heat transfer oil in the bottom cavity is quickly heated, and the higher temperature heat transfer oil enters the side cavity through the connecting pipe In the process, the heat transfer oil in the ultimate side cavity will also be heated quickly. After reaching the set temperature, the control system controls the heating device to cut off the power, and the materials inside the tank can be fermented efficiently at a constant temperature.

3.After the material fermentation is completed, turn on the hydraulic switch of the horizontal fermentation tank to discharge the material, and then use the pusher to assist the discharge. The organic fertilizer horizontal fermentation equipment is a kind of equipment used to process organic waste and convert it into organic fertilizer device.

Pulverization and packaging: After ripening, the organic fertilizer can be pulverized to obtain a uniform particle size. Finally, pack the organic fertilizer into a suitable package, such as bags or bulk.

Please note that different organic fertilizer horizontal fermentation equipment may have different specific application processes, and the above processes are only for general reference. Before using the equipment, read the operation manual of the equipment carefully, and operate and manage according to the guidance provided by the manufacturer.