An overview of the characteristics of Tongda heavy industry organic fertilizer chain pulverizer

The chain pulverizer is suitable for the pulverization of lumps with more fibers in the production of organic fertilizers. During the pulverization process, the machine adopts a four-corner planetary chain with high rotation and good flexibility to pulverize the materials. The design of the inlet and outlet is reasonable, and the crushed material is uniform, not easy to stick to the wall, and easy to clean.

Product Features Overview:

The inner wall of the machine casing is lined with stainless steel, which alleviates the problem of sticking to the wall and difficult to clean. The hammer is forged with special steel to resist wear and corrosion, which can effectively prolong the service life and improve the production efficiency. This machine has the characteristics of reasonable structure, simple operation, strong applicability and convenient maintenance.

Features:

(1) The structure is simple and reasonable, the operating cost is low, and the stone-on-stone principle is used, and the wear and tear is small;

(2) High crushing rate and energy saving;

(3) It has the functions of fine crushing and coarse grinding;

(4) Materials that are less affected by the moisture content of the material and less than 50% moisture content can be crushed;

(5) The working noise is lower than 75 decibels (db level), and the dust pollution is less; .

(6) Suitable for crushing medium-hard and extra-hard materials;

(7) The impeller self-lining wear is small and the maintenance is convenient;

(8) It has strong adaptability for materials with high moisture content, and should not be blocked. The material is unloaded smoothly. The material enters from the feeding port and collides with the high-speed rotating chain in the casing. After the impact, the material is squeezed and broken. Then it hits the inner wall of the casing and then collides with the chain, so that after several hits during the falling process, the particles below 3mm become powder and are discharged from the lower part;

(9) The inner wall of the pulverizer shell is lined with polypropylene board, and the pulverized material does not stick to the wall and is easy to clean.

(10) The blade of the pulverizer is made of special steel linden, which can effectively improve the production efficiency;

(11) The machine has reasonable structure, convenient operation and strong applicability.